Herunterladen Inhalt Inhalt Diese Seite drucken

Personal Safety; Τεχνικά Χαρακτηριστικά; Καθαρισμός/Συντήρηση - Parkside PWSA 12-LI A1 Originalbetriebsanleitung

Akku-winkelschleifer
Vorschau ausblenden Andere Handbücher für PWSA 12-LI A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Do not expose power
tools to rain or wet con-
ditions. Water entering a
power tool will increase the
risk of electric shock.
• Do not abuse the cord.
Never use the cord for
carrying, pulling or
unplugging the power
tool. Keep cord away
from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords
increase the risk of electric
shock.
• When operating a pow-
er tool outdoors, use an
extension cord suitable
for outdoor use. Use of a
cord suitable for outdoor use
reduces the risk of electric
shock.
• If operating a power
tool in a damp location
is unavoidable, use a
residual current device
(RCD) protected supply.
Use of an RCD reduces the
risk of electric shock. Use a
circuit breaker with a current
limit of 30 mA or less.

Personal safety:

CAUTION! The following
states how to avoid acci-
dents and injuries:
• Stay alert, watch what
you are doing and use
common sense when
operating a power tool.
Do not use a power tool
GB
while you are tired or
under the influence of
drugs, alcohol or medi-
cation. A moment of inatten-
tion white operating power
tools may result in serious
personal injury.
• Use personal protecti-
ve equipment. Always
wear eye protection. Pro-
tective equipment such as dust
mask, non-skid safety shoes,
hard hat, or hearing protec-
tion used for appropriate con-
ditions will reduce personal
injuries.
• Prevent unintentional st-
arting. Ensure the switch
is in the off-position
before connecting to
power source and/or
battery pack, picking
up or carrying the tool.
Carrying power tools with
your finger on the switch or
energising power tools that
have the switch on invites ac-
cidents.
• Remove any adjusting
key or wrench before
turning the power tool
on. A wrench or a key left
attached to a rotating part of
the power tool may result in
personal injury.
• Do not overreach. Keep
proper footing and ba-
lance at all times. This
enables better control of the
power tool in unexpected situ-
ations.
• Dress properly. Do not
wear loose clothing or
IE
NI
CY
9

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis