Stopping The Cutting; Autostop; Position Stop - struers Unitom-5 Bedienungsanleitung

Stopping the Cutting

Autostop

Position Stop

o
STOP Key
Unitom-5
Instruction Manual
Unitom-5 automatically stops cutting when the workpiece has
been cut through (default setting). The cut-off wheel moves to
start position (default setting). The cut-off wheel stops
rotating and the cooling water stops.
To be used if you want to stop the cutting at a certain depth
(please see Advanced Operations, for further information).
You can always stop the cutting process by pressing the STOP
o
key. The cut-off wheel moves to its start position (default
setting). The cut-off wheel stops rotating and the cooling
water stops.
17