Basic Operations; Using The Controls - struers Unitom-5 Bedienungsanleitung

Using the Controls

Front Panel Controls of Unitom-5
Groups of Keys
Acoustic Signals
Location of the Main Switch
8
Unitom-5
Instruction Manual

2. Basic Operations

s
START /STOP
A
Position of the cut-off wheel
B
Programming and monitoring functions
C
A short beep when a key is pressed indicates that the
command has been accepted.
A long beep indicates that the key is inactive at the moment.
Three long beeps indicate that the cutting process is finished.
The contents of the program memory are not lost
when the main switch is turned off.
o
of Unitom-5
Please Note...