Christie LX1750 Bedienungsanleitung Seite 7

Read this first!
WARNING:
Do not cover the air intake/exhaust ports or place anything within 1 m (39") of them.
Doing so will cause the projector to overheat, which can cause fire or damage to the projector.
z
z Do not place the projector in narrow, badly ventilated places.
z
z Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port.
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
z
z Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot
withstand heat close to this port.
Do not look and place your skin into the lights emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
z
z Strong light is emitted from the projector's lens. Do not look or place your hands directly into this light.
z
z Be especially careful not to let young children look into the lens. In addition, turn off the power and
disconnect the power plug when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause fire or electric shocks.
z
z For any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not project an image with the lens cover attached.
Doing so can cause fire.
Do not allow metal objects, flammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the
projector.
z
z Do not place containers of liquid or metal objects near the projector.
z
z If liquid enters inside of the projector, consult your dealer.
z
z Particular attention must be paid to children.
Do not touch other than the specified portion or remove the components.
Doing so may impair the performance or safety.
Use the ceiling mount bracket specified by Christie.
Using the ceiling mount bracket other than the specified one will result in falling accidents.
z
z Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.
If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks.
z
z Do not use anything other than an authorized ceiling mount bracket.
z
z Be sure to use the provided accessory wire with an eye bolt as an extra safety measure to prevent the
projector from falling down. (Install in a different location to the ceiling mount bracket.)
When attaching or replacing a lens, consult the technical staff or service personnel at a specialist
dealer.
Replacing a lens in the wrong way might damage the product.
When attaching or replacing a lens, observe related procedures in order to perform this properly.
6 - ENGLISH
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)