[Keystone] - Christie LX1750 Bedienungsanleitung

[Digital zoom -]
1) Press ▲▼ to select [Digital zoom -].
2) Press the <SELECT> button or ▶ .
z
z The menu screen is cleared and [Digital zoom -]
is displayed.
3) Press the <SELECT> button.
z
z Each press of the button reduces the image.
z Press ▲▼◀▶ to move the image. z
z
z The image move function only works when the
image size is larger than the panel resolution
*1: The panel resolution of the projector is 1 024 x 768 dots.
Note
z When there is no input signal, [Digital zoom -] is
grayed out and cannot be selected.
z When [True] is selected, [Digital zoom -] cannot be
selected.
z When [Custom] is selected, you cannot set [Digital
zoom -] to [Normal] or smaller.
z When [Store] registered in the [PC adjust] menu is
selected in [System] of the [Input] menu, the image
move function of [Digital zoom -] may not work
correctly.
z When VGA, SVGA, SXGA, WXGA, or UXGA is
selected in [System] of the [Input] menu and the
upward [Keystone] adjustment is at the maximum
value, [Digital zoom -] may not work correctly.
z To end the [Digital zoom -] operation, press any
button other than the <D.ZOOM>, <SELECT>, and
▲▼◀▶ buttons.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)

[Keystone]

1) Press ▲▼ to select [Digital zoom -].
2) Press the <SELECT> button or ▶ .
z
z The adjustment screen of the sub menu 2 is
displayed.
3) Press ▲▼ to select an item.
■ [Standard] z
Corrects the keystone effect vertically and
*1
horizontally.
1) Select [Standard], and press the
<SELECT> button.
z
z The menu screen is cleared and [Keystone] is
displayed.
z Press ▲▼◀▶ to correct. z
■ [Corner correction] z
Corrects distortion at the corners of the image.
1) Select [Corner correction], and press
the <SELECT> button.
z
z The screen to select the corner to correct is
displayed.
2) Press the <SELECT> button to select
the corner to correct.
Keystone
Keystone
3) Press ▲▼◀▶ to correct the corner.
[Screen] menu
Keystone
Keystone
<SELECT>
button
Keystone
ENGLISH - 57