Christie LX1750 Bedienungsanleitung Seite 23

About your projector
■ Connection terminals z
(1) DVI-D input terminal <DIGITAL (DVI-D) IN>
This terminal is for inputting the DVI-D signal.
(2) HDMI input terminal <HDMI IN>
This terminal is for inputting the HDMI signal.
(3) Computer input terminal <ANALOG IN>
This terminal is for inputting an RGB signal.
(4) RGB 5BNC input terminal <R,G,B,H/V,V IN>/<VIDEO
IN>/<Y,Pb/Cb,Pr/Cr IN>
This terminal is for inputting the G,B,R,H/HV,V signal,
video signal, and Y,Pb/Cb,Pr/Cr signal.
(5) USB terminal <USB>
This terminal is for use by service personnel.
Attention
z Make sure to connect the LAN cable to the indoor equipment.
22 - ENGLISH
(1) (2) (3)
(5)
(6)
(7)
(8)
(9)
(10)
(4)
(6) Serial input terminal <SERIAL PORT IN>
This input terminal is compatible with RS-232C and for
externally controlling the projector by connecting the
projector.
(7) Serial Output terminal <SERIAL PORT OUT>
This terminal is for the signal connected to the serial input
terminal.
(8) Remote control terminal <R/C JACK>
This terminal is for connecting the remote control when
using it as a wired remote control.
(9) LAN terminal <LAN>
This terminal is for connecting the projector to the network.
(10) S-VIDEO input terminal <S-VIDEO IN>
This terminal is for inputting S-VIDEO signals.
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)