Removing The Front Wheel - SWM SM 650 R 2016 Handbuch

REMOVING THE FRONT WHEEL

Set a stand or a block under the engine and see that
the front wheel is lifted from the ground.
SM: remove the two screws (A) and the brake cal-
liper.
Loosen the bolts (1) holding the wheel axle (2) to the
front fork mounts. Hold the head of the wheel axle
in place, and unscrew the bolt (3) on the opposite
side; draw the wheel axle out.
EN - 38
USER RS-SM_A000PP00693_ed1_06-2015.indd 38
Note*:
Do not operate the front brake lever when the wheel
has been removed; this causes the calliper pistons to
move outwards. After removal, lay down the wheel
with brake disc on top.
2
A
1
1
3
14/07/15 15:57