Filling With Petrol - FLORABEST FBME 575 A1 Handbuch

GB IE NI
oil tank holds 0.47 l oil.
Use brand oil SAE30.
5. Wait one minute after
adding oil. Then, recheck
the oil level to make sure it
is within specifications.
6. Wipe off any split oil.
Reinstall the oil tank cap/
dipstick (8) and close tightly.

Filling with petrol

(Fig. A, H)
Warning - petrol
is flammable and
hazardous to health
- Keep petrol in containers
intended for this purpose.
- Only refuel outdoors and
never with the engine
running or when the
machine is hot.
- Do not smoke whilst
refuelling.
- Avoid skin contact and
inhalation of the fumes.
- Remove spilt petrol.
- Keep petrol away from
24
sparks, open flames and
other ignition sources.
- Open the filler cap
carefully to allow excess
pressure to escape.
- Dispose of leftover petrol
in an environmentally
friendly way (see
"Disposal / Environmental
Protection").
- Do not use petrol/oil
mixtures.
- Use normal or super
unleaded petrol.
- Only use clean, fresh
petrol.
- Do not store petrol
for extended periods
or time. Evaporation
of volatile portions or
additives will reduce
its quality.
1. Stop the machine and let
the engine cool at least 2
minutes before removing
the fuel tank cap (11).
2. Clean the fuel tank cap
(11) area of any dirt and
debris. Remove the fuel
tank cap (11).