Initial Operation; Mounting The Grip Rod - FLORABEST FBME 575 A1 Handbuch

GB IE NI
• Keep the equipment in a
dry place and out of reach
of children. Machines
are dangerous if used by
inexperienced people.
• Secure the machine during
transport to prevent loss of
fuel, damage or injuries.

Initial operation

Caution! Risk of
injury from
rotating blades.
Carry out
work on the
equipment only
when the blade is
switched
off and stationary.
Observe the included
Briggs & Stratton
instruction manual.
Before starting the device,
you must
- remove all transport safety
devices,
20
- fold up the grip rod and
lock the quick-release
clamp,
- fill in motor oil,
- fill in petrol,
- assemble the electric
starter battery,
- remove the mulching plug
if necessary,
- mount the grass catcher if
necessary,
- set the cutting height if
necessary,
- assemble the side
discharge chute if
necessary.

Mounting the grip rod

(Fig. A, C, D)
Always protect the
Bowden cable
(6) and electric starter
cable (24) from being
pinched.
1. Remove the mower from the
box. Remove all transport
securing devices. Observe
local disposal regulations.
We recommend retaining
the box for later use.