FLORABEST FBME 575 A1 Handbuch Seite 16

GB IE NI
• Mow only in daylight or
with good artificial lighting.
An until working area can
result in accidents.
• If possible, avoid using the
equipment on wet grass.
• Always ensure secure
positioning, particularly on
hillsides, landfills, ditches or
dykes.
This will give you better
control of the equipment in
unexpected situations.
- Always work across the
slope, never upwards or
downwards.
- Take particular care when
changing the direction of
travel on the slope.
- Do not mow on
excessively steep
slopes (max. 10°).
• Run the equipment only
at walking speed or self-
propelled speed.
• Take particular care when
turning the equipment
around or pulling it towards
you.
• Stop the cutting tool if the
equipment has to be tipped
up for transportation over
16
a surface other than grass
and when moving the
equipment from and to the
surface to be mown.
• Do not use the equipment
with damaged safety
equipment or guards or
with no safety equipment
attached, e.g. side
discharge deflector and /
or rear deflector.
This ensures that the
equipment remains safe.
• Do not tamper with or
disable the machine safety
systems or features. Risk
of injury.
• Do not change the engine
regulator setting and do
not overrun it. This may
damage the equipment.
• Before starting the engine,
disengage all cutting tools
and drives.
• Before starting the engine,
check the electric starter
battery capacity, charge
the battery full after each
use.
• Start or operate the start
switch with care and
in accordance with the