Filling With Engine Oil And Checking The Oil Level; Filling With Petrol - FLORABEST FBM 135 A1 Originalbetriebsanleitung

GB MT
3. Hook the grass collection box
(24) into the mounting provided
for this (33) on the rear of the
equipment.
4. Release the impact protection
(8). It holds the grass collection
box in position.
Dismantling the Grass Collec-
tion Box:
5. Lift the impact protection (8) and
remove the grass collection box
(24).
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
1. Unscrew the oil filler cap and
dipstick (10) and pour oil into
the tank. The oil tank holds0,6 l
oil. Use brand oil (e.g. SAE 30).
2. To check the oil level, wipe the
dipstick (10) on a clean cloth
and replace it in the tank until it
stops.
3. After pulling it out, read off
the oil level on the dipstick.
The oil level should be in
the marked area between
the minimum and maxi-
mum marks.
4. Wipe off any spilt oil and
close the oil filler cap (10).
Check the oil level every time be-
fore mowing and add oil when the
lower marking point is reached.
66

Filling with Petrol

Warning! Petrol is flammable and haz-
ardous to health:
- Keep petrol in containers intended for
this purpose;
- Only refuel outdoors and never with
the engine running or when the ma-
chine is hot;
- Open the filler cap carefully to allow
excess pressure to escape;
- Do not smoke whilst refuelling;
- Avoid skin contact and inhalation of
the fumes;
- Remove spilt petrol;
- Keep petrol away from sparks, open
flames and other ignition sources;
- Dispose of leftover petrol in an envi-
ronmentally friendly way (see "Dis-
posal / Environmental Protection").
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates.
1. Unscrew the filler cap (
pour in the petrol to the lower edge of
the filler.
Do not fill the tank entirely, to allow
the petrol room to expand.
2. Wipe away petrol residues around the
filler cap and close the filler cap.
20) and