Initial Operation; Mounting Grip Rod; Installing The Grass Collection Box; Filling With Engine Oil And Checking The Oil Level - FLORABEST FBM 450 A1 Betriebsanleitung

Initial Operation

Caution! Risk of injury from
rotating blades. Carry out
work on the equipment only
when the blade is switched
off and stationary.
Observe the Briggs & Stratton in-
struction manual supplied.
Before starting the device, you must
- fold up the grip rod and lock the quick
clamping levers,
- fill in motor oil,
- fill in petrol,
- mount the grass catcher if necessary,
- set the cutting height if necessary.

Mounting grip rod

Make sure that the Bowden cable
( 5) is not crushed during the as-
sembly of the grip handle.
The upper grip handle (1) can be
mounted in two positions.
1. Fold the bottom handle (4) and
the upper grip handle (1) up-
wards.
2. Bring the bottom handle (4) into
the desired position and lock the
quick clamping levers (21) by
pushing them in the direction of
the handle (4). They must fit the
handle so that a tensioning with
medium force can be carried out.
Otherwise, the quick clamping
levers must be turned clockwise
for tensioning them or anti-clock-
wise to loosen them.
3. Lock the quick clamping levers
(25) to the upper grip handle (1)
as described below 2.
4. Fasten the Bowden cable (5) us-
ing a cable clamp (6) to the bot-
tom handle (4).
Installing the Grass Collection
Box
Caution: Do not operate the
equipment with the grass col-
lection box or impact protec-
tion installed incompletely.
Risk of injury!
Mounting the net
1. Put the plastic straps (28) on the
grass catcher (20) over the grass
catcher rod (29).
Fixing the Grass Collection
Box onto the Equipment:
1. Lift the rear impact protection
(22).
2. Hook the grass collection box
(20) into the mounting provided
for this (30) on the rear of the
equipment.
3. Release the impact protection
(22). It holds the grass collection
box (20) in position.
Dismantling the Grass Col-
lection Box:
4. Lift the impact protection (7) and
remove the grass collection box
(20).
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level base.
1. Unscrew the oil filler cap and
dipstick (19) and pour oil into the
GB
33