Operation; 22 6.1 Essential Points For Operation; Switch-On; 22 6.4 Driving The Vehicle Into Position - Bosch VLS 5140 Originalbetriebsanleitung

en �� | �LS ��4� | Operation
6.

Operation

6.� Essential points for operation
¶
Only authorized, trained personnel aged 18 years or
older are permitted to operate the lifting platform.
¶
Only passenger cars or motor vehicles with a
maximum overall weight of 4000 kg may be lifted.
¶
In the case of maximum load, the front/rear load
distribution must not exceed 2 : 1.
¶
Only vehicles with a wheelbase permitting full
contact between the tyres and runways may be
lifted.
¶
The lifting platform must only be operated via the
supplied operating unit.
¶
Before moving the lifting platform, make sure that
there are no persons within the danger zone, and
that no objects are leaning against or positioned on
the vehicle or lifting platform.
¶
No unauthorized personnel must be allowed in the
vicinity of the lifting platform.
¶
Riding on the lifting platform or in the raised vehicle
is prohibited.
¶
Do not use the lifting platform as a crane or a
support for other lifting mechanisms (e.g. pulley).
¶
Electric welding work on the raised vehicle or on the
lifting platform itself is only permitted if the master
switch is turned to OFF (O).
¶
Never use the lifting platform in the event of
malfunction or component damage.
¶
If the lifting platform malfunctions, shut it down
immediately, secure it against unauthorized use, and
notify Bosch customer service or an authorized
service outlet.
¶
Lock the master switch when not in use.
|
1 689 989 122 2012-09-13
6.2

Switch-on

Switch on the VLS 5140 by way of the master switch.
¶
Set the master switch to the ON (I) position.
"
Lifting platform is ready for operation.
6.� Preparation
1. Make sure that the runway is completely lowered.
2. Remove any tools, dirt, grease, and oil from the
vicinity of the lifting platform.
"
The vehicle can now be driven onto the lifting platform.
6.4 Driving the vehicle into position
DANGER – Incorrect positioning of vehicle!
Risk of (fatal) injury due to the vehicle falling
or tipping during lifting or lowering and when
working on the vehicle.
¶
Drive the vehicle into position exactly as
described.
1. Drive the vehicle in a straight line to the center
of the lifting platform. The wheels on each side
of the vehicle must be on the center line of the
corresponding runway.
2. Stop the vehicle and secure in position by applying
the parking brake or engaging a gear.
3. Exit the vehicle.
4. Check the position of the vehicle.
"
The vehicle is now positioned on the lifting platform.
Robert Bosch GmbH