Spare Parts/Accessories - Parkside POF 1200 C2 Originalbetriebsanleitung

Electrical machines do not belong
in domestic waste.

Spare parts/accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone (see
"Service-Center" Page 38). Please have the order number mentioned below ready.
Position Position
instruction exploded
manual drawing
13/22 22-24/73
17 17
20/30 47/49
24/29 63-68/72
25 61
27 69
31-36
31
32
33
34
35
36
* MAN = approved for manual feeds.
n = max. rotation speed (min
HW = cutting blades are made of hard metal.
** Dimensions of the cutter (mm): Cutter diameter
R = radius of the profile (mm)
)
= angle of the V-notch
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details.
Defective units returned to us will be dis-
posed of for free.
www.grizzly-service.eu
Description
Set 1: Collet chuck set (6mm / 8mm)
Depth stop
Set 3: Suction adapter + Reducer piece
Set 2: Parallel stop + guide bars
Template guide
Combination wrench
Set 4: 6-part cutter set
(MAN / n=max. 35000 / HW)*
Profil cutter (25.0x12.0x8 / R 4 mm)**
Rounding cutter (22.0x11x8 / R 6.3 mm)**
V-notch cutter (12.7x9.0x8 /
Notch cutter (12.0x20.0x8)**
Notch cutter (6.0x20.0x8)**
Fillet cutter (22.0x13.x8 / R 6.3 mm)**
) for which the cutter is approved.
-1
∅
90°)**
)
x length of the cutter head x shaft diameter
GB MT
Order No.
91104251
91104250
91104252
91104258
91104253
91104256
91104255
35