Original Accessories / Attachments; Caution Utility Services; Have You Understood Everything; Preparing For Use - Parkside POF 1300 Bedienungs- Und Sicherheitshinweise

concealed cable or the device's mains lead.
Contact with an electrical lead or cable means
that the metal parts of the device may also be-
come live and this can result in electric shock.
J
Always keep the device clean, dry and free of
oil or grease. Dirty devices increase the risk of
injury (e.g. by slipping). You will work better
and more safely with clean cutting tools.
Original accessories /
Q
attachments
J
Use only the accessories and attachments de-
tailed in the operating instructions. The use of
inserted tools or accessories other than those
recommended in the operating instructions
could lead to you suffering an injury.

Caution utility services!

Q
J Danger!
Ensure that you do not strike electrical cables,
gas or water pipes when you are working with
an electrical power tool. Check a wall using a
suitable detector before you drill or cut slots.
Have you understood
Q
everything?
J
Once you have made yourself familiar with this
general safety advice for electrical power tools,
and with the help of the device's operating in-
structions you now know about all the functions
of and how to handle your electrical power tool,
you are finally in a position to start work. Ob-
serving the instructions and advice will maximise
your safety while working with the device.
Safety advice / Preparing for use

Preparing for use

Q
router bit set / scope
Q
of application
Router bits (also referred to as router cutters) are
available in a wide range of qualities and designs
to suit the type of cutting and intended application.
The following descriptions give you an indicative
overview (without liability) of the scope of applica-
tion of different router bits. The included router bit
set contains router cutters for the most common
routing tasks.
Flush trim bit with bearing:
Particularly suitable for flush trimming and chamfer-
ing laminated boards, wooden beams and edgings
(plastic or veneer) in furniture making and shop fitting.
The bearing allows the bit guide itself directly along
the workpiece. The most common applications of
this bit include rounding the edges of window frames,
cupboards, tabletops, shelves and mantelpieces.
Corner rounding bit with bearing:
Corner rounding bits are suitable for profiling edges
in frames and framework, especially working with
solid woods, such as spruce, beech, oak and alder.
Slot cutter, with two cutting edges:
Particularly suitable for solid wood, boards, e.g.
chipboard and MDF (medium density wood fibre
boards) and for plastics. Suitable for milling plane
GB/MT 39