Adjustments; Stability And Manoeuvrability - Vermeiren V300 Installationsanleitung

EN
NL
3

Adjustments

PL
•
Read the instruction manual of the specific wheelchair.
•
Be aware of the technical details and limits of intended use; see the instruction manual.
CS
•
The wheelchair needs to be adjusted by a specialist dealer according to the instructions
in this manual.
•
Any modification to the product will lapse the warranty and will cease the responsibility of
Vermeiren.
•
Only use parts and tools described in this manual.
•
Prevent bystanders from accessing the working area.
•
While adjusting and operating the wheelchair, make sure no objects or body parts get
caught between moving parts.
•
Only use the settings in this manual.
•
Make sure that the adjustment on left and right side of the wheelschair are the same.
•
Deviation of the adjustment settings may influence the stability of the wheelchair with risk
of tilting and falling.
•
Make sure all screws are firmly secured before riding the wheelchair. Adhere to
the tightening torques for screws according to the Torque table on our website.
Important remark
•
For more information contact Vermeiren, see the website http://www.vermeiren.com/.
3.1
CAUTION
Be aware that by changing the position of the rear wheels, the stability of the wheelchair is
influenced. By adjusting the rear wheels
1. in rear adjustment position, the wheelchair becomes more stable, but less manoeuvrable;
2. in front adjustment position, it becomes less stable but more manoeuvrable.
To increase stability or manoeuvrability following adjustments can be made:
•
Rear-wheel position, see §3.2.
•
Seat height and angle, see §3.3
CAUTION Risk of injuries or damage

Stability and manoeuvrability

Risk of tipping over
Installation manual
- 4 -
V-series wheelchairs
2018-10
Adjustments