Footrest Length; Footplate Position; Footplate Angle - Vermeiren V300 Installationsanleitung

EN
NL
3.6
CAUTION
Make sure that the footrests won't touch the ground.
PL
Keep a minimum safe distance of 60 mm above the ground.
The maximum length of the footrest is limited to the length
CS
indicated by a triangle on the front of the footrest tube, see
picture.
Since they are connected, both footrests of V300XL are adjusted simultaneously.
Adjust the length as follow:
1. Remove the socket screw (24) on
the back of the footrest.
2. Adjust the footrest to a comfortable
length.
3. Retighten the socket screw firmly.
4. Repeat this for the second footrest.
Make sure the footrests are
positioned identically.
3.7
The footplate(s) can be used in 2 positions: front and rear. Default, each footplate is adjusted
with its base plate in the rear position.
To place the footplate in front position:
1. Remove the socket screws (25) of both footplates.
2. Exchange left and right footplate.
3. Tighten the socket screws (25) firmly.
3.8
Adjust the angle of the footplate at its toothed clamp:
1. Loosen socket screw (25) on footrest (26).
5. Turn the footplate in the desired angle (80°- 100°).
The dashes (27) on the toothed clamp indicate the
angular positions.
6. Retighten the socket screw.
7. Repeat this for the second footplate.

Footrest length

Risk of damage

Footplate position

Footplate angle

24
V300 – V500
26
25
Installation manual
- 14 -
V-series wheelchairs
2018-10
Adjustments
24
V300 XL
27