Operating Field; Ignition Lock - Kärcher KMR 1700 B/LPG Betriebsanleitung

Operating field

1 Operating hour counter
2 Indicator lamp for parking brakes
3 Travel direction indicator
4 Indicator lamp for dipper
5 Cool water temperature
6 Indicator lamp for battery voltage
7 Indicator lamp for choke (cold start)
8 Indicator lamp for petrol operations
9 Indicator lamp for gas operations
10 Switch Petol / Gas operations
11 Indicator lamp for oil pressure
12 Turn on/off the warning blinking lights
13 Indicator lamp for warning blinking sys-
tem
14 Lock/ release parking brake
15 Turn on/off the dipper
16 Indicator lamp for sidelights
17 Beacon (accessory)
18 Indicator lamp for beacon lamp
1 Indicator lamp of waste container
2 Raise waste container
3 Tip waste container out
4 Tip waste container back in
5 Lower waste container
6 Shake off dust filter
7 Turn on/off the suction blower
8 Raise/ lower side-brushes and operate
them
9 Raise/ lower sweep roller and operate it
10 Lock roller brush in operating type "Fine
setting" or "store in floating position"
Increase/decrease sweeping track
11 Tank indicator (petrol operations)
12 Motor speed adjustment
13 Choke (cold start)

Ignition lock

– Position 0: Switch off engine
– Position 1: Ignition on
– Position 2: Start the engine
Direction indicator/ high beam/ horn
– Left indicator: Press the lever down-
ward.
– Right indicator: Press the lever upward.
– Switch on high beam: Pull lever towards
you
– Horn: Activate the lever
Pedals
A Accelerator pedal, "forwards"
B Accelerator pedal, "reverse"
C Brake pedal
D Pedal "Increase roller brush contact
pressure" (only in operating mode
"store in floating position")
25
English