Operating And Functional Elements - Kärcher B 40 C Ep Bedienungsanleitung

1 Vacuum bar lowering lever
2 Cover waste water tank
3 Holding rail for home base
4 Fluff filter
5 Wastewater reservoir rinsing system
(option)
6 Flexible lock of rinsing system (option)
7 Lock of waste water tank
8 Float
9 Push handle
10 Coarse dirt sieve
11 Waste water tank
12 Fresh water reservoir filler neck
13 Detergent bottle holder
14 Lock of the fresh water reservoir with fil-
ter
15 Fresh water tank
16 Locking the tank
Secured with an additional plate and a
screw
17 Cleaning head *
18 Brush rollers (R-Cleaning head)
Disk brush (D cleaning head)
19 Waste container (only BR)
20 Fresh water level display
21 Pedal for raising/ lowering the cleaning
head
22 Rotary handle to incline the vacuum bar
23 Wing nuts for fastening the vacuum bar
24 Suction hose
25 Vacuum bar *
12

Operating and Functional Elements

Illustration of scrubbing vacuum
26 Mains cable with mains plug
27 Automatic fill of fresh water reservoir
(option)
28 Strain relief clamp
29 Water quantity regulator
30 Safety button
31 Program selection switch
32 Fuse for brush drive
33 Storage surface for cleaning set "Home
base box"
34 Cable hook
35 Dirt water discharge hose
36 Dosing equipment for dirt water
* not included in the delivery
Colour coding
– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.
EN
Program selection switch
1 OFF
Device is switched off
2 Normal mode
Wet clean the floor and vacuum up dirt
water.
3 Intense mode
Wet clean the floor and allow the deter-
gent to react.
4 Vacuum mode
Suck in the dirt fleet.
5 Polishing mode
Polishing the floor without the applica-
tion of liquid.
2
-