Heat-Up Function - Teka VT TC 2P.1 Anleitung

ble to also use the outer ring, next to the
inner circuit, so that the cooking surface
adapts better to the size of the cookware.
Connection / activation of outer ring
1 Choose the desired power level (from 1
to 9) using sensor buttons
GB
in the double circuit heating element
located in the upper part of the cooker.
2 Touch sensor button
the outer ring. Indicator light (13) will
turn on, which indicates that the outer
ring is activated.
Disconnection / deactivation of outer ring
1 Touch sensor button
light (13) turns off and the outer ring will
be disconnected. The inner ring will con-
tinue to be turned on until the heating
element is disconnected.

Heat-up function

(Automatic start of cooking)
This function will help you when cooking,
since it is not necessary to be there at the
same time. The touch control panel pre-pro-
grammes the chosen hotplate to the maxi-
mum power level and then lowers it to the
desired power level, chosen by you, after a
certain amount of time. (See table 1).
Table 1
Level
selected
1
2
3
4
5
6
7
8
66
or (5/4)
(6) to activate
(6). Indicator
HEAT-UP COOKING
FEATURE
(Time in seconds)
60
180
288
390
510
150
210
270
ACTIVATING THE HEAT-UP FUNCTION
1 Choose power level
sensor button (5). The decimal point
of the power indicator will blink for 10
seconds.
2 Before 10 seconds have passed, choose
the power level (between
10 seconds, you will hear a sound and
the decimal point (16) will stay on, which
indicates that the automatic boost func-
tion is activated. If the chosen level is
9
or , the heat-up function will not be acti-
vated.
Example:
You want to cook at power level
plate and you want to quickly heat up the
element at the beginning.
9
Choose power , touch sensor button
(5) again and the decimal point will blink.
Next, use sensor button
power level to 6. The system will keep the
heating element at power level
mum) for 150 seconds; after that time, the
system will automatically lower the power
6
level to .
MODIFYING THE POWER
DURING THE HEAT-UP
With the heat-up function activated, press
sensor button (5) and the system will
change the power level to the new value
chosen; however, if the new power level
chosen is 9, the function will be deactiva-
ted.
When increasing the power level using
sensor button (5) the system takes into
account the time passed up until that point.
9
and then touch
1 8
and ). After
0
6
on a hot-
to lower the
9
(maxi-
LEVEL