Scrabble; Us Delay; Computer / Internet Use - DGT 3000 Bedienungsanleitung

Scrabble™

Option 21 Scrabble™25 minutes TIME, followed by UPCOUNT
The clock starts with 25 minutes for each player without bonus or delay. When a player reaches 0.00,
a non-blinking flag will be shown, but the clock will continue to run in count-up mode. In Scrabble™
the overtime is used to calculate a penalty. By default sound is on in this option.

US DELAY

In the US Delay method the delay time is shown in a separate section of the display. The main time
will not start count down immediately at the start of a turn. The delay time will first count down to
zero and only then the main time starts to count down. The end result is exactly identical as in the
(Bronstein) Delay method, but the information is displayed in a different way. When a player reaches
0.00 for his main time, a blinking flag will be shown.
FREEZE is off by default in US DELAY.
Option 22 US Delay, 5minutes with 2seconds free per move
In this option the clock starts with 5 minutes, 0 seconds on each side. In the bottom right of the
display Delay: 0.02 is shown. When the clock is started, and at the start of each turn this delay time
will count down first before the main time starts counting down. Every time a player ends his turn
0.02 will be reloaded in this section and it will count down to 0.00. Then the main time will start
counting down.
Option 23 US Delay, 25 minutes with 5 seconds free per move
In this option the clock starts with 25 minutes, 0 seconds on each side. In the bottom right of the
display Delay: 0.05 is shown. See also Option 22.
Option 24 US Delay, 1 hour 55 minutes, followed by 1 hour with 5 seconds free per move
In this option the clock starts with 1 hour, 55 minutes, 0 seconds on each side. In the bottom right of
the display Delay: 0.05 is shown. When one of the players reaches 0.00 main time for the first time, 1
hour is added on both sides. A non-blinking flag will be shown on the side of the player who reached
0.00. The players or the arbiter have to decide whether the required number of moves has been
made. When a player reaches 0.00 in the second period, a blinking flag will be shown on that side.

Computer / Internet use

Option 25 Computer / Internet use
This option should be used when the DGT 3000 is connected to a DGT e-Board. The clock will serve as
a display for a computer chess program. In option 25 the lever and all buttons are disabled. When this
option is selected, the clock will start with a display like this:
15