Unit initialization
After checking all connections once more,
connect the unit to the power supply by swit-
ching on the fuse and the main switch.
On the display appears
12:00
and the clock symbol begins to blink.
After a short time (30 seconds) you can start
with programming.
You may now set the current time using
the
and
buttons during the
blinking of the clock symbol.
20:00
To accept the selected time, press the
MODE-button until the selected time
begins to blink.
20:00
Briefl y F1 appears on the display.
After that, the current time is displayed and
the unit is ready for operation.
20:00
32
GB