Deactivating The Preset Time; Heating Time Limiter - EOS EMOTEC B6000 Montage- Und Gebrauchsanweisung

After a short time, the display alternates
between current time and startup time. The
display illumination goes out.
20:00
When the pre-selected start-up time is
reached, the sauna switches itself on.
After the designated heating time it then
shuts itself back off automatically.
17:10

Deactivating the preset time

To deactivate the preset time, press the button. This switches the sauna heater on. Pres-
sing the button again switches the sauna heater off.

Heating time limiter

If you wish to individually set the heating time
for your sauna system, press the
„MODE" button and choose P2 using the
P 2
selection buttons or .
Press the „MODE" button again.
06:00
Now you may set the heating time using the
selection buttons.
03:00
Confi rm your input by holding the „MODE"
button pressed continuously until the new
heating time and the symbol expire on the
display.
GB 35