Programming Current Time - EOS EMOTEC B6000 Montage- Und Gebrauchsanweisung

Programming
time
To reach this program level, press the
„MODE" button and the
taneously until F1 is displayed, as well as
the clock symbol.
You can change the time with function F1.
Confi rm with the „MODE" button and the
previously set time begins to blink with the
clock symbol.
Set the current time using the
buttons (e.g. when adjusting daylight-
savings time).
Confi rm your selection by pressing and hol-
ding the „MODE" button, until the entered
value begins to blink.
F1 briefl y appears on the display, then the
unit returns to its default readout.
38
current
button simul-
and
GB
F 1
20:00
21:00
21:00