Package Contents; Technical Data - EOS EMOTEC B6000 Montage- Und Gebrauchsanweisung

Package contents

(subject to change)
Included with the control unit are:
1. An heater-sensor board with overheat shutoff protection, KTY-sensors with sensor housing
, two 3x25 mm fastening screws and a 2,0 m long sensor cable, red and white.
2. A plastic bag with three 4 x 20 mm fastening screws.
3. A replacement overheat protection module.

Technical data

Rated voltage:
Schaltleistung:
Heating time shut-off:
Display:
Protection type:
Control range,
sauna operation:
Sensor system:
Control characteristics:
Fan capacity::
Light:
Error display:
Environmental temperature:-10°C to +30°C
Storage temperatures:
24
400 V 3 N 50 Hz AC
max 9 kW resistive load (AC 1 operation)
upgrade to 36 kW possible through connection to power cont-
rol units
6 h
LCD, backlit
IPx4 in accordance with EN 60529, splashproofi ng
30 to 115°C
KTY-Sensor with overheat shutoff protection at 142° C
digital two-step control
max. 100 W, max. 450 mA (only fan without capacitor)
max. 100 W, max. 450 mA (only ohm resistive load)
blinking warning triangle and error code on LCD
-20°C to +70°C
GB