Changing The Default Temperature - EOS EMOTEC B6000 Montage- Und Gebrauchsanweisung

Afterwards P2 shortly appears, then the dis-
play returns to default readout. The maximum
heating time now matches the entered value
until changed again (re-start required).
Changing the default temperatu-
re
By default the temperature for Finnish opera-
tion is set to 95°C. To change this parameter,
press the „MODE" button.
P1 then appears on the display in the pro-
gramming area.
Press the button repeatedly until P3 and
the heating symbol appear on the display,
and confi rm this with the „MODE"
button.
The thermometer symbol appears, and the
heating symbol begins to blink.
Use the selection buttons
temperature. The arrow on the thermometer
symbol displays the selected temperature
level.
Finally, press and hold the „MODE" button
until the heating symbol besides the entered
value begins to blink.
This confi rms the entered value.
36
and to set the
GB
20:00
P 2
P 3
95
85
85