Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Guidelines - wtw MultiLab 540 Bedienungsanleitung

Mehrparameter-meßgerät für ph-mv und leitfähigkeit
Inhaltsverzeichnis

Werbung

Safety guidelines

This device has been built and tested according to the legally required safety standards for electronic measuring
instruments and has left our works in a condition complying with all the requirements of technical safety (IEC 1010).
The perfect functioning and operational safety of the instrument can only be ensured if the user observes the normal
safety precautions as well as the specific safety guidelines stated in the present operating instruction.
l
Before switching the instrument on it must be ensured that the operating voltage
stated on the plug-in power supply unit corresponds to the mains voltage
(statement of the supply voltage range).
l
Operation of the instrument is only admissible with accessories corresponding to the
specifications in the chapter "Technical data".
The manufacturer gives no warranty for damages which can be caused by using
unsuitable accessories (e. g. wrong line adaptor).
l
The perfect functioning and operational safety of the instrument can only be
maintained under the climatic conditions specified in the chapter "Technical data"
of this operating instruction.
l
Opening of the instrument, balancing, maintenance and repair work must only be carried out
by a suitably qualified technician authorized by us.
Contraventions may - depending on the situation - lead to a loss of the right to claim
under guarantee.
l
If there is reason to assume that the instrument can no longer be employed
without a risk, it must be set aside and appropriately marked to prevent further use.
l
The safety of the user may be endangered, e.g., if the instrument
¦
¦
¦
¦
l
If in doubt, the instrument should as a rule be sent back to the manufacturer's -
"Wissenschaftlich-Technische-Werkstätten GmbH" - for repair and maintenance.
BA61103/08.00/Pro/MultiLab540-1
Please read this information carefully before
putting the device into service!
shows severe mechanical damage,
no longer operates as specified,
has been stored over a longer period under unsuitable conditions,
has been subject to difficult conditions during transport.
3

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis