Description Of Product; Special Version; Functional Description - Condair 505 Betriebsanleitung



Description of product

.1

Special version

.2

Functional description

1
– Except for the steps mentioned in this manual, the user must not carry
out further operations with the Condair 505.
– All components that are in contact with water must be thoroughly rinsed
with tap water if the Condair 505 has not been in use for an extended
period, before filling the unit and after each deliming cycle.
– Use only original accessories and genuine spare parts from your Condair
supplier.
– The Condair 505 may not be modified in any way without written consent
from the manufacturer.
The special version Condair 0 S is designed for direct connection to the
water supply. The Condair 505 S is equipped with a float valve and a con­
nector for an overflow pipe.
Note: The standard Condair 505 may be upgraded to the special version at
any time – please contact your Condair representative.
The Condair 505 uses the atomizer principle. The suction piece takes in the
water from the reservoir. Then the whirl disk moves the water towards the
atomizer ring where it is transformed into aerosol fog.
The vanes of the whirl disk take in the air via the radial openings of the hous­
ing. This air stream passes by the atomizer ring and directs the aerosol fog
out of the humidifier in an upward direction.
The atomizer unit is driven by a maintenance­free electric motor.