Switching On - Videotec HOV Hi-PoE IPM Bedienungsanleitung

HOV HI-POE IPM AVAILABLE MODELS AND FEATURES
Operating Injector
temperature
From -10° PoE class 3
(14°F) up to (13W)
+60°C (140°F)
Hi-PoE class 4
(25W)
From -10° PoE class 3
(14°F) up to (13W)
+60°C (140°F)
Hi-PoE class 4
(25W)
From -30°C Hi-PoE class 4
(-22°F ) up to (25W)
+60°C (140°F)
Hi-PoE class 4
(25W)
Tab. 3

8 Switching on

The automatic pre-heating (De-Ice) process
could be started whenever the device is
switched on and the air temperature is
below 0°C. This process is used to ensure
that the device works properly even at
low temperatures. The duration ranges
depending on environmental conditions
(from 60 minutes up to 120 minutes).
During the lighting phase the device reads the
status of the dip switch and automatically detects
all the connected options for the correct energy
management of the housing.
10
Camera Demisting
system
PoE max. class
p
2 (7W)
PoE max. class
p
3 (13W)
PoE max. class
p
2 (7W)
PoE max. class
p
3 (13W)
PoE max. class
p
3 (13W)
PoE max. class
p
3 (13W)
Illuminator Heater
– –
–
p
– –
–
p
–
p
–
p
The LEDs shown in the figure allow to check the
product's operating status.
Fig. 14
Refer to the table to identify the operating status.
Anti-icing Fan with dou-
heated glass ble air filter
–
p
–
p
– –
– –
– –
–
p
MNVCHOVHPOE_1642_EN