Switching On And Off; Maintenance; Problem Solution - Videotec Pth355P Bedienungsanleitung

Switching on and off

Before connecting the appliance:
check that the material supplied corresponds to the specifications indicated on the data plate, following the chapter
Identification data
check that PTH355P pan & tilt motor and the other components of the installation are closed in order to avoid direct
contact with energized parts
make sure that all the parts are fixed in a solid and reliable way
check that the electrical capacity and the connection cables will support the system power consumption

Maintenance

PTH355P pan & tilt motor does not need a special maintenance.
Make sure they always rest on a solid base, and that the power supply and connection cables do not hinder the
operator.

Problem solution

Even if PTH355P pan & tilt motor is very easy to use, some problems may arise during installation, configuration or
use.
Problem
The control keyboard or the
receiver are working, but the
pan & tilt motor does not
respond
The pan & tilt motor
responds to the controls of
DTRXDC receiver but the
PRESET does not work
Possible cause
Incorrect connections
The voltage supplied by the
control unit is different from that
required by the pan & tilt motor
Incorrect connections
Pag. 8
Remedy
Check the connections between the pan &
tilt motor and the control unit
Check the identification data of the control
unit and of the pan & tilt motor
Check the connections between the pan &
tilt motor and DTRXDC receiver
MNPTH3553803