Servicing - CareFusion MicroLab Betriebshandbuch

4. After cleaning/disinfecting, the transducer should be immersed
briefly in distilled water and left to dry.
5. Re-assemble the mouthpiece holder.
Turbine transducer
CAUTION: Do not attempt to wash or immerse the MicroLab
transducer housing in water or cleaning fluid, as there are
electronic components inside that will be permanently damaged.

Servicing

There is no routine maintenance required for the MicroLab and there
are no user serviceable parts in this spirometer. Please return the
unit to CareFusion or an authorized agent, if servicing is required.
If your spirometer requires service or repair please see page 99 for
contact details.
Housing
Locating pip
82
Cut-out