GAS GAS FSR 450 2008 Betriebsanleitung Seite 95

5. Separate the
connectors from the
electronics (F).
(G)
WARNING
When the injection pump pipes are removed, petrol may be spilled
and cause a fire.
Stop the engine before removing the tank. Keep naked flames and
sparks away from the tank cap. Do not smoke.
(F)
6. Separate the
connector (G) from
the fuel pump and
secure to one side of
the tank.
22
- -
NOTE
A cap protects the spark plug.
Keep this clean and dry.
(A)
7. Remove the spark
plug hood.
9. Take out the spark plug
and clean carbon deposits
from the spark plug with a
small tip or a metallic brush.
Readjust the gap (A) in the
plug between 0.7 and 0.8
mm. (0.028 – 0.031 in).
Before removing the carbon
deposits, check its colour; this
colour tells us whether the
standard plug is the best for
our use.