GAS GAS FSR 450 2008 Betriebsanleitung Seite 110

Spring adjustment
- Remove the seat and the side covers.
- Loosen the bolt of the air filter conduit clamp.
- Remove the silencer.
- Remove the sub chassis with the air filter housing.
(A)
(A). Compression adjustment.
Suspension spring
The standard spring is k=5,4.
(A). Nut
(B). Spring.
(C). Counter nut.
- Tighten the counter nut correctly.
- Following the adjustment, move the spring up and down to ensure
that this is correctly in place.
- Refit all removed parts.
Rear shock absorber spring replacement
Stiffer or softer springs are available. If the standard spring is
unsuitable for your purpose, select a proper one according to the
rider's weight and course conditions.
- Use of a stiffer spring: faster rebound.
- Use of a softer spring: slower rebound.
See the adjustments page 47.
37
- -
(A)
(C)
(B)
NOTE