GAS GAS FSR 450 2008 Betriebsanleitung Seite 128

Setting the multifunction display parameters
After confirming each value, the display goes from one screen to the next until all have been displayed. If no button is pressed, the display
returns to the home screen after 15 seconds.
Activating adjustment mode
To start setting mode for the
multifunction display, press
buttons 1, 2, and 3
simultaneously for 3 seconds,
and then release.
Selecting the values for the
wheel circumference
Enter the value for the wheel
circumference by pressing button
1 in succession. To go on to the
next digit, press button 3.
Confirm by pressing button 2.
Note:
If you do not know the value of
the wheel circumference, see
the section on "Measuring the
wheel circumference"
55
- -
Selecting the speed unit
To change between kmph and
mph, press button 1.
Confirm the selection by pressing
button 2.
Selecting the time format
To change between the 12 and
24 hour clock, press button 1.
Confirm by pressing button 2.