GAS GAS FSR 450 2008 Betriebsanleitung Seite 107

Adjust the return to the standard measures (rotating anti-clockwise,
12 positions).
CAUTION
The front fork left and right tubes must be at the same level and
aligned with the plate.
Adjusting the compression
- To adjust the compression, rotate the adjustment control on the
upper part of the front forks by hand.
- Adjust the compression suited to your needs under certain conditions.
Adjust the compression to the standard measures (rotating anti-
clockwise, 12 positions).
Adjusting the oil level
- Using the stand under the frame, stabilize the motorcycle upright.
- Take out the handlebar bolts and take out the handlebars.
- Remove the suspension caps from the rods.
- Slowly compress the front forks all the way.
- Lift the fork springs.
- Holding the suspension rod cap with a spanner, loosen the cap
locking counter nut.
- Remove the suspension rod caps.
- Remove the suspension spring guide.
- Using a spanner, remove the springs from the forks.
- Place the oil level indicator on the upper part of the fork tube and
measure the distance from the upper part to the oil level.
Standard oil level
Adjust to the level of oil required in the tables using the following oil:
Recommended oil
34
- -
100 mm
(A). Releasing oil.
(B). Filling oil.
SAE 7´5