GAS GAS FSR 450 2008 Betriebsanleitung Seite 127

Functions
RPM: Bar
Tachometer with bar graph. The bar graph of the tachometer displays
up to 12,000 rpm.
RPM: Digital Tachometer
The rpm are shown on the right side, second row. The digital
tachometer displays up to 12,000 rpm. The tachometer signal can
be captured from the sparkplug cable.
Gear change indicator according to rpm
This function permits setting an indicator for changing gears at a
specific rpm level. The red LED warning light flashes when the rpm
reaches the specific level and stops flashing when the gear is
changed.
SPD: Speedometer
The speedometer information appears in the centre of the screen.
It shows up to 399.9 kmph or mph.
MS: Maximum speed gauge
It shows the highest speed reached since the last resetting of the
data.
DST: Distance travelled
This appears on the right side, in the second line of the screen. The
TRIP function contains the vehicle's accumulated mileage since the
last RESET operation.
ODO: Odometer
It shows the total mileage accumulated by the vehicle. The data is
stored in the memory, even when the device is not running.
ART: Time of use controller
Calculates the total time in operation. It starts counting from the
moment the motor is turned on.
RT: Total time of use controller
It calculates the vehicle's operation time since the last RESET
operation. It starts counting from the moment that movement begins.
The data is stored in the memory, even when the device is not
running.
12/24 hour clock
It shows the time in either 12 or 24 hour formats.
Ambient temperature / engine temperature gauge
The ambient temperature is displayed on the upper left-hand part of the
screen.
The screen can display the engine temperature from an optional
temperature sensor. If this is too high, a warning LED lights up in yellow.
High rpm gauge / Gear change warning according to rpm
If the rpm are too high, the second warning LED lights up in red.
This function permits setting an indicator for changing gear at a
specific rpm level The red LED warning light flashes when the rpm
reaches the specific level and stops flashing when the gear is
changed.
54
- -