8.6
Changing the battery in the transparent inlay
(2)
(1)
1.
Switch pump off.
2.
Close shut-off vlaves.
3.
Remove lid.
4.
Unscrew the small lid (1) with the two pins (2) of the opening
device.
5.
Remove the inlay.
6.
Push the LED out of the bottom of the inlay.
7.
Exchange the batteries. Type CR2032, 3V
Observe the pole (+/-)!
8.
Assembly in reverse order.
EN 22
W90.04.100-P
05|2017