BADU Profi Eco VS Bedienungsanleitung Seite 20

WG27.50.011-P
WG27.50.012-P
WG27.50.013-P
WG27.50.014-P
After a voltage drop the pump automatically starts up again with
the speed last set, or remains stopped if it had been stopped
beforehand.
EN 20
Digital Inputs:
External controlling can be activated
or deactivated with the menu item
"E".
"oFF" = deactivated
"dl" = digital inputs (potential-free)
activated
Switching behaviour "0" (stop):
The switching behaviour of the digital
input "0" can be changed (inverted)
by using the menu item "0".
"cL" means that the motor is
stopped at a closed contact.
"oP" means that the motor is
stopped at an open contact.
Resetting:
The motor is reset to the factory
setting when the "Info" button is
pressed for at least 10 seconds. The
motor stopd and "rESEt" is
displayed.
The pump current power
requirements are shown in watt (P
XXX) in the display when the "INFO"
button is pressed.
The control unit's display switches off
after three minutes without action.
05|2017