General Information; Terms Of Guarantee - Comet 8 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

This manual has two separate parts.

The first part is meant for both the end user and the

is meant for the

SKilled Technician

• The manufacturer of the machine (for instance a motorised pump) where the pump is fitted (in these

instructions, the "machine with the pump" can also be a "system with the pump" such as a pumping

station);

• A person who generally works at a Service Centre, who is trained and authorised to carry out extraordinary

maintenance and repairs both on the pump and on the machine with the pump. Any work on electrical

parts must be carried out by a

a person who has the professional training and qualifications to check, install and repair electrical devices

correctly and according to the current regulations in the country where the machine with the pump is

installed.

Congratulations for choosing one of our products. We would like to remind you that operator safety,

operating efficiency and protection of the environment were key factors for the design and manufacturing

of this product.

In order to safeguard its features, it is important you read this manual with due care and attention and

comply with the instructions provided.

Please pay particular attention when reading the parts of the text marked:

because they contain important safety instructions for operating the pump.

The ManufacTurer iS noT liable for daMaGe cauSed by

• failure to comply with the information provided in this manual and in the manual for the machine with

the pump;

• using the pump for other uses than those described in the section on "

• failure to comply with current regulations for safety and the prevention of accidents at work;

• incorrect installation;

• failure to carry out maintenance;

• unauthorised modifications or alterations;

• failure to use original spare parts or use of parts that are not specific for that particular pump;

• repairs not carried out by a

The guarantee is for 24 months starting on the date of the sales document (receipt of payment, invoice, etc.)

provided the pump's guarantee certificate is filled-in properly and sent back to the Manufacturer within 10

days of the purchase date.

The purchaser has the right to have any parts replaced that are found faulty by the Manufacturer or his

authorised representative in case of material or manufacturing faults, but has no right to demand a refund

for any direct or indirect damage of any kind.

The purchaser must pay any expenses incurred for labour, packing and transport.

Products returned to the Manufacturer for repairs under the guarantee must have all their original parts

TRANSLATION Of The ORIGINAL INSTRUcTIONS

INTROdUcTION

alone.

we mean:

SKilled Technician