Viewing Information; Setting Call Times - Comelit 8596 Technisches Handbuch

3. Select the Set automatic reply menu using the
press the button to enter.
SPECIAL SETTINGS MENU
Intercom Directory
Set tone repetition
Set call times
Set automatic reply
EN
4. Press to activate the function.
5. Press the button to exit and save the changes.
30
1. Enter the Installer menu (See point 19).
2. Select the Program Monitor menu using the
press the button to enter.
3. Select the Info menu using the
button to enter.
Logical address
Set bracket
Information
Reset configuration
Select network type
SYS: iPower
MAC: 00:25:29:02:01:BC
IP: 169.254.155.40
ID: 00000001, SUB: 0
SW: /trunck@3534
42
,
SET AUTOMATIC REPLY
Automatic reply

Viewing information

,
INSTALLER MENU
Program monitor
, buttons and press the
PROGRAM MONITOR
INFO MENU
buttons and
31
From this menu it is possible to modify:
• Reply waiting time: maximum time beyond which communication
ends without the call being answered.
• Talk time: duration of a conversation between internal unit and
external unit.
• Intercom talk time: duration of an intercom conversation.
• Reset wait time: after a call, wait time from activation of a relay to
switch-off of the monitor.
1. Enter the Installer menu (See point 19).
2. Select the Special Settings menu using the
press the
3. Select the Set call times menu using the
the button to enter.
buttons and
4. Select the value that you want to edit using the
press the
5. Edit the value using the
6. Press the

Setting call times

button to enter.
INSTALLER MENU
Special Settings
SPECIAL SETTINGS MENU
Intercom Directory
Set tone repetition
Set call times
Set automatic reply
button to enter.
SET CALL TIMES
Reply waiting time
Talk time
Intercom talk time
Reset wait time
, buttons.
SET REPLY WAITING TIME
Reply waiting time 0 6 5
button to exit and save the changes.
, buttons and
, buttons and press
, buttons and