Changing Intercom Directory Addresses - Comelit 8596 Technisches Handbuch

3. Press the button to enter the Logical address menu.
Logical address
Set bracket
Information
Reset configuration
Select network type
4. Set the logical address of the main monitor in the same
EN
residential unit using
Logical address 0 2
Master
Slave 1 4
Left
5. Move to the Slave option using the
button to confi rm.
Logical address 0 2
Master
Slave
Left
6. Move to the Slave Address option using the
change the address using the
Logical address 0 2
Master
Slave
Left
7. Press the button to exit and save the changes.
38
PROGRAM MONITOR
, buttons.
ADDRESS SETTING
Right
, buttons and press the
ADDRESS SETTING
1 4
Right
,
, buttons.
ADDRESS SETTING
1 0
Right
23

Changing Intercom Directory addresses

1. Enter the Installer menu (See point 19).
2. Select the Special Settings menu using the
press the
3. Press the
4. Select the directory entry whose address you want to change
using the
buttons and
5. Select the Confi gure Address menu using the
press the
button to enter.
INSTALLER MENU
Special Settings
button to enter the Intercom Directory menu.
SPECIAL SETTINGS MENU
Intercom Directory
Set tone repetition
Set call times
Set automatic reply
, buttons and press the button to enter.
INTERCOM DIRECTORY
GENERAL INT
GENERAL EXT
MAIN
SECONDARY 1
SECONDARY 2
SECONDARY 3
Modify
button to enter.
INTERCOM SETTINGS
Configure name
Configure address
, buttons and
, buttons and