Safety Instructions; Symbols And Icons; Υποδείξεις Ασφάλειας; Αποθήκευση - Parkside PBSA 12 B1 Originalbetriebsanleitung

G B
CY
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:
Carefully read these operating in-
structions.
Electrical appliances must not be
disposed of with the domestic
waste.
6
Symbols on the battery:
Carefully read these operating in-
structions.
Do not subject the battery to strong
sunlight over long periods and
do not leave it on a heater (max.
45°C).
Take batteries to an old battery
collection point where they will
be recycled in an environmentally
friendly manner.
Store the battery in
charged condition
The battery requires an ambient
temperature of
+10°C to + 40 °C.
The battery should never come into
contact with water.
Symbols on the recharger:
Warning!
Before using for the fi rst time, care-
fully read through the user manual.
The recharger is for indoor use
only.
Miniature fuse
Protection class II
Do not dispose of
batteries in house-
hold waste, fi re or
water.