Care And Maintenance; Responsible Disposal; Specifications - CO/Tech PN01-1200 Bedienungsanleitung

2. Press [ ] to deactivate standby mode.
Resetting the thermostat to its default factory settings
Hold in [ ] for 5 seconds.

Care and maintenance

• Always unplug the lead from the power point and let the panel heater cool down
properly before cleaning.
• Clean the heater using a lightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• If the panel heater is not to be used for an extended period, it should be
unplugged and stored in a dry and dust-free location.

Responsible disposal

This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling the product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.

Specifications

Rated voltage 220–240 V AC, 50/60 Hz
Wattage
36-7282 800 W
1200 W
36-7283
IPX4
IP rating
Mains lead 1.5 m
11