Care And Maintenance; Troubleshooting Guide - CO/Tech ZHQ1288-RMHD-65 Bedienungsanleitung

Switching the heater on
1. Switch the main power switch (1) to [ I ]. The infrared heater will beep and
the indicator lamp will shine red. The infrared heater is now in standby mode.
2. Press [ ] (2) to switch the infrared heater on. The infrared heater will beep and
the indicator lamp will shine green.
Switching the heater off
1. Press [ ] (2) to switch the heater to standby mode.
2. Switch the main power switch (1) to [ 0 ] to switch the heater off.
3. The heater should be unplugged when it is not in use.

Care and maintenance

Warning
• Never immerse the product, the mains lead or plug in water or other liquid.
• Never try to open, repair, dismantle or modify the product in any way. Repairs
must only be carried out by qualified service technicians and only using original
spare parts.
• Always disconnect the plug from the wall socket before the product is moved or
cleaned and when it is not in use.
• Clean the product by wiping it with a damp cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• Store the product in a dry, dust-free environment out of the reach of children.

Troubleshooting guide

The infrared heater
doesn't start.
Responsible disposal
This symbol indicates that the product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner.
When recycling your product, take it to your local collection facility or
contact the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Check that:
• both the main power switch (5) and standby
button (2) are in the "on" position.
• the mains lead is connected to a wall socket.
• the wall socket is energised.
6