CO/Tech PN01-1200 Bedienungsanleitung Seite 8

Programme mode
1. Hold [ PROG ] pressed in for 3 seconds, 7 triangles
will appear on the display representing the days of
the week.
- Press [ ] or [
you want the programme to begin, e.g. 3 for
Wednesday (1 is Monday, 2 is Tuesday, and so on).
2. Press [ PROG ] – the digits to the left of the colon
will flash.
- Press [ ] or [
the programme to begin, e.g. 14.
3. Press [ PROG ] – the digits to the right of the colon
will flash.
- Press [ ] or [
the programme to end, e.g. 22.
Information
If, like in the example, you have set 14:22,
it means that the programme will begin at
14.00 hours and end at 22.00 hours.
For every hour the programme is to run for,
a vertical bar will be shown on the display, in
this example it shows 8 bars.
4. Press [ PROG ] – the digits to the left of the colon
will flash.
- Press [ ] or [
you wish the room to have for the duration of
the programme, e.g. 20.
] to set which day of the week
] to set the hour that you wish
] to set the hour that you wish
] to set the temperature that
8