Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Remove the bracket from the rear
panel by lifting the lower ends out of
the lower holes.
Important
•
The wall bracket must be mounted at least 20 cm above the floor.
•
The panel heater must be installed so that there is at least 30 cm distance to the nearest
object at the sides, at least 15 cm free space above and at least 10 cm to the floor.
•
Make sure that the wall has no concealed electrical wiring, gas or water pipes before
drilling/screwing. Use an appropriate fastening method for the surface in question.
12 cm
At least 20 cm above the floor
4. Use the wall bracket as a template and mark out where you need to drill/screw.
Using a spirit level will help ensure that the bracket is level.
Instructions for use
Information
•
An odour may be emitted by the panel heater during the first 30 minutes of use.
This is completely normal.
•
The time and day settings should be made before any programmes are set, to
ensure that the heater operates at the right time.
15 cm
10 cm
5
30 cm
Werbung
Inhaltsverzeichnis
