Accepting An Incoming Call; Rejecting An Incoming Call; Call Transfer - Renkforce AN-8006 Bedienungsanleitung

Dialling from the phone number memory
The CD tuner has a memory for 6 phone numbers. These numbers can be dialled directly without having to enter
the phone number again. Refer to the chapter further down to find out how to save these numbers.
• Press the button
• Press the station button 1-6 (15) on which the desired number was saved for 2 seconds.
• Press the button

Accepting an incoming call

• If the automatic call accept function is not activated on the mobile phone, press the button
call.
• Press the button

Rejecting an incoming call

• Press the button
Terminating a call
• Press the button

Call transfer

• During a phone call, press the button TEL MENU (24) for 2 seconds to transfer the call to the mobile phone or
the hands-free equipment.
Number display
• For incoming calls, the caller's number is shown on the display.

If the caller has suppressed the number display or if the mobile phone net does not support this feature,
the caller display does not work.
(22) to access telephone mode.
(22) again to dial.
/AMS (21) to terminate the call.
/AMS (21) to reject the call.
/AMS (21) to terminate the call.
(22) to accept the
81