Safety Instructions - Renkforce AN-8006 Bedienungsanleitung

Safety instructions

In the case of damages which are caused due to failure to observe these operating instructions,
the guarantee will expire. Liability for any and all consequential damage is excluded!
Nor do we assume liability for damage to property or personal injury, caused by improper use
or failure to observe the safety instructions. Any claim to warranty will lapse in such cases!
• The unauthorized conversion and/or modification of the product is inadmissible because of safety
and approval reasons.
• The device may only be used with the 12 V DC vehicle power supply (with the negative terminal of
the battery connected to the body of the vehicle). Never connect the device to a different power
supply.
• The device must be set up correctly. Please follow the operating instructions carefully in doing so.
• When the product is opened or the safety circuit is jumpered, invisible laser radiation may be emitted.
Caution - if proceeding in a different way or using any other controls than those specified in this
manual, you may expose yourself to hazardous radiation.
• The product is not a toy and should be kept out of reach of children! Children cannot judge the
dangers involved when handling electrical devices.
• Do not expose the device to high temperatures, dripping or splashing water, strong vibrations or high
mechanic stress.
• Do not operate the light when it is unattended.
• Do not leave packing material unattended. This may become dangerous playing material for
children.
• Comply with the safety and operating instructions of any other appliances that are connected to the
device.
• If you are not sure about the correct connection or if questions arise which are not covered by the
operating instructions, please do not hesitate to contact our technical support or another specialist.
52
Operating Instructions

English