Renkforce AN-8006 Bedienungsanleitung Seite 63

• Take the remote control out of the steering wheel attachment as described further up.
• Slide the battery compartment cover on the back upwards and take it off.
• Remove the battery together with the insulation pad, remove the insulation pad and replace the battery. The
positive pole of the battery must point upwards.
• Close the battery compartment. The latch must snap into place.
• Replace the remote control in the steering wheel attachment as described further up.
• If the remote control no longer functions properly, the battery is discharged and must be replaced.
• Replace the battery analog to the above description.
• Exchange the battery for a new 3V lithium button cell CR2025.
63