JVC EXAD KW-AVX800 Bedienungsanleitung Seite 38

You can enter [0] – [9] only.
• [BS]: Erases the previous character before the
cursor.
• [Del]: Erases the character on the cursor.
• [Enter]: Confirms the entry.
5
Use the Bluetooth device to connect, while
"Open..." is displayed on the screen.
Enter the same PIN code (as entered in the above
step) on the device to be connected.
Now connection is established and you can use
the device through the unit.
The device remains registered even after you
disconnect the device. Use <Connect> (or activate
<Auto Connect>) to connect the same device
from next time. ( the following, and pages 66
and 67).
To register using <Search>
1
Press [AV MENU].
• Make sure "New Device" is selected. If not, press
[5] or [∞] to select it.
2
Press [Bluetooth].
3
Press [Search].
The unit searches for available devices and displays
the list of them. (If no available device is detected,
"Device Unfound" appears.)
4
Select a device you want to connect.
5
Enter the specific PIN code of the device.
• Refer to the instructions supplied with the device
to check the PIN code.
6
Use the Bluetooth device to connect, while
"Connecting..." is displayed on the screen.
Now connection is established and you can use
the device through the unit.
To connect a special device <Special
Device>
1
Press [AV MENU].
2
Press [Bluetooth].
3
Press [Special Device].
The unit displays the list of the preset devices.
4
Select a device you want to connect.
5
Use <Open> (or <Search>) to connect.
To connect/disconnect a registered
device
1
Select "Bluetooth PHONE" or "Bluetooth
AUDIO," then select a registered device you
want to connect/disconnect.
2
Press [AV MENU].
3
Press [Bluetooth].
4
Press [Connect] or [Disconnect].
• Select <Connect> to connect the selected
device.
• Select <Disconnect> to disconnect the selected
device.
To delete a registered device
1
Select "Bluetooth PHONE" or "Bluetooth
AUDIO," then select a registered device you
want to delete.
2
Press [AV MENU].
3
Press [Bluetooth].
4
Press [Delete Pair].
Confirmation screen appears. Press [Yes].
38